LD3™ COMPRESSION LOAD CELL

Sensors

General Purpose Load Cell

The robust and versatile LD3 weight sensor is installed under a load bearing support. This load cell compensates for changes in output due to the natural movement of a vessel.

  • Mechanically secure by being bolted together rather than having floating mounting hardware
  • Mounting hardware options attach to different types of tanks; including horizontal tanks
  • Allows for thermal changes, providing accurate readings when physical changes in the tank occur due to thermal expansion and contraction
  • Constructed of 17-4 Stainless steel, heat treated to PH900 for a strong, low profile load cell
  • NEMA – 6P water resistant
Specification Sheets:
Manual:

Technical Specification

Average Accuracy0.08%
Excitation Voltage10 to 30 VDC
Excitation Current3 mA
DefectionDepending on capacity 0.004 to 0.012 in.
Functional Integrity2x rated load in compression
Structural Integrity4x rated load in compression
Operating Temperature0° to 100° F (-18° to 38° C) – Standard
50° to 150° F (10° to 66° C) – Mid
DimensionsInstalled Height: 2.7 in. (70 mm) for up to 10K; 3.3 in. (84.6 mm) for 15 to 25k models
Footprint: 6 x 3.5 in. (152.4 x 89 mm) (Length x Width)

Download

Specification Sheets:
Manual:

Configure sensor and send request